'77 900SS w/1600 miles. Semi-basket. **SOLD FOR $10k**
- johnpeter
- Cucciolo - the Lil Pup
- Posts: 10
- Joined: Sat Sep 06, 2008 10:16 am
- Location: Los Alamitos, CA
'77 900SS w/1600 miles. Semi-basket. **SOLD FOR $10k**
Reluctant sale. Disabled 61yo and need dentistry.
I am the second owner.
Original owned made it a right shift bike so the levers were heated 'n bent. Looks OK. He was old school in '77.
The rear rim was not true and I stupidly had a Sun(EDIT: It is an Akront WM4) rim laced in. This was in 1980 when the bike was disassembled for paint. Then the project set.
It will need paint 'n polish. Storage has been in a house connected garage.
All fasteners are labled and are small boxed. Engine was never touched with a wrench, the seal is on the bottom of the case. Well, the original owner did set valves and ignition timing.
Missing items? No turn signals, no small carbs or quiet mufflers. No rear dampers.
Tank is not dented, the swingarm has new bushings and shaft. Both seats. Frame is true.
$15k, no trades. Local pick-up.(EDIT: Reduced to $12.5k)
I did talk to Steve via phone last year and he said send pics. So in the next week I might learn to use a digi cam and Flicker.
PM me your number or ask for mine and we can talk.
I am the second owner.
Original owned made it a right shift bike so the levers were heated 'n bent. Looks OK. He was old school in '77.
The rear rim was not true and I stupidly had a Sun(EDIT: It is an Akront WM4) rim laced in. This was in 1980 when the bike was disassembled for paint. Then the project set.
It will need paint 'n polish. Storage has been in a house connected garage.
All fasteners are labled and are small boxed. Engine was never touched with a wrench, the seal is on the bottom of the case. Well, the original owner did set valves and ignition timing.
Missing items? No turn signals, no small carbs or quiet mufflers. No rear dampers.
Tank is not dented, the swingarm has new bushings and shaft. Both seats. Frame is true.
$15k, no trades. Local pick-up.(EDIT: Reduced to $12.5k)
I did talk to Steve via phone last year and he said send pics. So in the next week I might learn to use a digi cam and Flicker.
PM me your number or ask for mine and we can talk.
Last edited by johnpeter on Wed Apr 27, 2011 2:57 pm, edited 2 times in total.
When the only tool one has is a hammer everthing looks like a nail.
I would like to talk to you about the bike. For some unknown reason I can't pm you. Please send me an email at sroubos@msn.com
Thank you.
Serge
Thank you.
Serge
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
900ss basket
judging by prices i've been quoted lately if you sold it bit by bit you'd get twice that 

-
- Cucciolo - the Lil Pup
- Posts: 4
- Joined: Tue Dec 08, 2009 3:59 pm
- Location: HENDERSONVILLE NC
- Contact:
johnpeter 900ss
could you email me a contact number I would like to talk with you rack727@aol.com bb
-
- Cucciolo - the Lil Pup
- Posts: 4
- Joined: Tue Dec 08, 2009 3:59 pm
- Location: HENDERSONVILLE NC
- Contact:
wasting peoples time
It seems to me and several others that you are a reluctant seller at best and don't mind wasting people's time bb
Re: wasting peoples time
+1rackburns wrote:It seems to me and several others that you are a reluctant seller at best and don't mind wasting people's time bb
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
-
- Cucciolo - the Lil Pup
- Posts: 4
- Joined: Tue Dec 08, 2009 3:59 pm
- Location: HENDERSONVILLE NC
- Contact:
good luck with johnpeter
this guy certainly knows about wasting time. I think he is getting himself mixed up with people who dont have time to waste. At least that was the situation in my case. Good luck with this one