<-=- Club Bevel Heaven -=->

Yeah, Peter, I did a few years back - the bike is a SSD, btw, so it might be different with your Mille.

I tried a pair of NGK 3419 BR6HIX. I didn't stick with them. I had the feeling that the bike didn't run as 'clean' as with standard plugs. And, since the plugs aren't difficult to get to, I went back to regular B6HS.

I use iridiums in my Laverda Formula, however - and they work fine. Which is just as well, 'cos those plugs are hard to get to .

Ciao

Craig

The Iridium plugs are good if you have upgraded the ignition system. They have a lower firing voltage when they are clean but they do require a higher output ign. system to keep them clean as the center electrode is smaller than regular plugs. The errant blobs of uncombustibles that float around in old bevel engines can smother the fine wire if the voltage isn't up to snuff. The extended tip does help [ the P in the plug number] by being deeper in the chamber and more exposed during combustion.