<-=- Club Bevel Heaven -=->

Hi GUys


Just after some help. Does anyone know the brand new and worn out thicknesses on Pantah discs.

Just trying to source some to get the Pantah on the road.

Regards

Shane

Brembo usually had the minimum thickness stamped along the outer edge of their discs in the 80's.
Pantah ones were 6mm thick when new, reduced to 5.8mm when worn.
You may find the marks stamped around the edge if you take a wire brush to the disc.
Hope that helps.

Jon

See

http://www.bevelheaven.com/~BB/phpBB2/v ... +thickness

Pantah's should be the same as Darmah.

Kev

Thanks Guys. I will wire brush it and see.

.2mm total wear sounds small to me but I will see what I can find.

Thanks