Starter Motor Brushes

r1ch4rdb · Post by **r1ch4rdb** » Fri Sep 11, 2009 2:50 pm

Hi all,

Does anyone know of a UK Supplier of Starter Motor Brushes for a Darmah

Thanks in advance
Rich

BEVEL DAVE · Post by **BEVEL DAVE** » Sat Sep 12, 2009 3:15 pm

I have them if you cant find any.

Pm me.

Dave.

Craig in France · Post by **Craig in France** » Sun Sep 13, 2009 4:27 am

r1ch4rdb wrote:Hi all,

Does anyone know of a UK supplier of starter motor brushes for a Darmah
Rich

Hi Rich

(For future reference, it always helps if you say who you've already tried ...

)

1. Andy Jones at Mdina.
2. Tony Brancato at Brancato Engineering.
3. Any competent auto electrician should be able to fashion you some up, using suitable blanks. Now, finding such a 'competent auto-electrican' can be a challenge

; but try Mike Simmons at West Country Windings (ignore the 'West Country' bit - they've now moved to ... Essex!)

Btw, in case you get asked, it's a standard Magneti Marelli unit, reference MT 65B. (And it may, in origin, actually be a Lucas unit 'cos MM took over much of Lucas' operations in the 1970s). However, there seems to be some doubt as to whether Magneti Marelli has a presence in the UK or not ... and if they do, exactly what they can offer.

But try:
Magneti Marelli After Market Ltd
Shaftmoor Lane, Hall Green, Birmingham, B28 8SW.
0121-609 5491

HTH

Craig

r1ch4rdb · Post by **r1ch4rdb** » Sun Sep 13, 2009 10:31 am

Cheers Craig,

I'll follow up those.

Regards
Rich

Craig in France · Post by **Craig in France** » Sun Sep 13, 2009 1:59 pm

No worries, Rich. Hope something works out - can you please just post back on how it goes?

Ta.

Craig

Post by **BevHevSteve** » Tue Sep 15, 2009 12:06 pm

i have em in stock of course

http://shop.bevelheaven.com/detail.aspx?ID=1213

Craig in France · Post by **Craig in France** » Tue Sep 15, 2009 2:34 pm

BevHevSteve wrote:i have em in stock of course

http://shop.bevelheaven.com/detail.aspx?ID=1213

Well, there you go! Easy solution there for you, Rich

(You must learn to speak up for yerself a bit more, Steve!

. Just ignore any of this, 'available in the UK', malarkey ... I can only guess people say it in the hope they'll find stuff quicker or cheaper; but, truth to tell guys, it ain't necessarily so ...)

Ciao

Craig

Post by **BevHevSteve** » Tue Sep 15, 2009 2:43 pm

Well it is a fine line between providing a service to the [Ducati] community to help out, and being a pimp and directing everyone to buy [only] from me.....

But I do try to find a balance.

and yes we ship worldwide, all the time..........

Post by **BevHevSteve** » Tue Sep 15, 2009 2:58 pm

it occurs to me that some folks might have gone through my shopping site last year or whatever.......... But keep in mind this year alone I have added more than 100 new products and it has been like that the previous several years - adding new stuff constantly I am........

rwhc80 · Post by **rwhc80** » Fri Sep 25, 2009 6:48 am

Steve,

Just noticed your posting re : the new parts.
Do you have available a 750 GT 3 light dash ?
had a look over your site, but cannot see at present, i'm sure I have seen them prior ? also correct foot peg rubbers with logo ? restoring 73 GT just purchased as basket case.

Cheers
Rick

Craig in France · Post by **Craig in France** » Fri Sep 25, 2009 8:12 am

BevHevSteve wrote:Well it is a fine line between providing a service to the [Ducati] community to help out, and being a pimp and directing everyone to buy [only] from me.....

But I do try to find a balance.

As far as I'm concerned, pimp away

- at the end of the day, nothing you do can force someone to buy from you, right?

Ciao

Craig

<-=- Club Bevel Heaven -=->

Starter Motor Brushes

Starter Motor Brushes

Re: Starter Motor Brushes

Starter Brushes

PARTS