Bosch Pickups - Continuity Testing / Identifying Wires
Posted: Thu Oct 04, 2012 2:09 pm
Greetings Ducatisti!
I have a 1978 Darmah with a problem. The ignition pickup wires were cut without tagging which ones correspond with eachother. I tried using an ohm meter to solve this dilemma by checking continuity, but could not find a point on the pickups where the wires are exposed or there is a lead for those wires.
Any advice is greatly appreciated. Cheers!
I have a 1978 Darmah with a problem. The ignition pickup wires were cut without tagging which ones correspond with eachother. I tried using an ohm meter to solve this dilemma by checking continuity, but could not find a point on the pickups where the wires are exposed or there is a lead for those wires.
Any advice is greatly appreciated. Cheers!