<-=- Club Bevel Heaven -=->

Posted: **Mon Apr 03, 2006 11:02 am**

hi all, can any one help with a problem i pulled my clutch case off on
the weekend and the plates came off,but the splined central basket has
sort of got wear marks on the splines where the tangs of the plate rub.
question one : can i just file out these undulations with fine grade paper
or do i need a new splined centre

question two :how much meat does the clutch need to have on the plate
mine have only got about 1-1.5 mm,is this enough.
thanks

Posted: **Sat Apr 08, 2006 12:47 pm**

I don't believe you specified what bike you are working on, but if it is a bevel Ducati I think you will have better luck using a file to smooth out the ridges in the STEEL clutch center.

Posted: **Sun Apr 09, 2006 11:15 am**

hi, bike is 72 gt,
i did try filing down but need a very thin file to get into the groove of the splines,does this not matter about having more play in the splines ?

Posted: **Sun Apr 09, 2006 5:49 pm**

co311a wrote:hi, bike is 72 gt,
i did try filing down but need a very thin file to get into the groove of the splines,does this not matter about having more play in the splines ?

On the road you won't even notice the difference.

<-=- Club Bevel Heaven -=->

worn clutch ?

worn clutch ?

worn clutch

Re: worn clutch