What is a set of LKG plug caps worth you know the once......

Post your bevel drive twin cylinder FOR SALE and WANTED ads in this space......
MartinMille BANNED
BANNED
Posts: 766
Joined: Fri Sep 21, 2007 8:15 pm

What is a set of LKG plug caps worth you know the once......

Post by MartinMille BANNED »

I have some good used KLG plug caps you know the once that everyone is after, minor splitting around the end of the rubber but you don't see this at all once there one
been meaning to put them on ebay only because of its large user base
what are they worth?
The inners have been modified at some stage but one is like they are supposed to be not that it really matters and they do have clamps

You tell me what are they worth?


Or what about some Verlicchi 38mm clip ons in very good condition what are these worth

Image
Image
Image
Image
cafe*racer
SSD900 Darmah
Posts: 364
Joined: Tue Nov 16, 2004 1:49 am
Location: Castro Valley, CA

Post by cafe*racer »

Its worth what someone is willing to pay. If you want top dollar put them on eBay, I might even bid on them. I have one already and need another. Too bad Damien at bevelrubber has not repro'd these yet. KLG 'type' caps are available with clamps very cheap. The clamps are ok but the caps are dissapointing even for the price.

I believe the Verlicchi's are being reproduced as well and can be had for $50-$80 USD, seen on eBay. Not sure of the quality though. Would think originals could bring $100+ depending on condition.

Get ahold of me direct and I will make you an offer on the caps.

Thanks, Jordan
writerplay@hotmail.com
MartinMille BANNED
BANNED
Posts: 766
Joined: Fri Sep 21, 2007 8:15 pm

Post by MartinMille BANNED »

Tell you what, anyone that can come up with these items for me can have the LKG plug caps

I need the standard engine breather hose for either an SD or SSD , I believe they could be the same part and it must have, Gran Tourismo, made in Italy by G.Narva written in white on the hose
also need the 4 standard air box hose clamps

Still looking for the Brake lines -with brembo collars 11/79 I only need the white collars I dont care what they came off as long it has those dates somewhere between 05/79 to 11/79

not a big ask for these parts, for plug caps that you can not get

there must be someone out there that has these parts if you dont want to trade ,I will buy if that suits you better
cafe*racer
SSD900 Darmah
Posts: 364
Joined: Tue Nov 16, 2004 1:49 am
Location: Castro Valley, CA

Post by cafe*racer »

Martin- Sorry I can't help you there, I only have roundcase parts. If you change your mind on the caps please let me know. Jordan
cafe*racer
SSD900 Darmah
Posts: 364
Joined: Tue Nov 16, 2004 1:49 am
Location: Castro Valley, CA

Post by cafe*racer »

Damien says he is going to repro these very soon...I am waiting...somewhat patiently...
cafe*racer
SSD900 Darmah
Posts: 364
Joined: Tue Nov 16, 2004 1:49 am
Location: Castro Valley, CA

Post by cafe*racer »

Martin-

Look what came in the post the other day!

Image
Image
MartinMille BANNED
BANNED
Posts: 766
Joined: Fri Sep 21, 2007 8:15 pm

Post by MartinMille BANNED »

Good feeling when you find NOS like that AH ;)
User avatar
abmartin
SD900 Darmah
Posts: 323
Joined: Tue Apr 10, 2007 5:08 pm
Location: New Brunswick, Canada

Post by abmartin »

Whats the big deal with these caps? I still have the two I took off my bike. I replaced them because they were about the worst plug caps I have ever seen. Good thing I didn't throw them away.

Can the quest for originality go too far?

Bruce
1979 900SS
Fredericton, NB
Canada
cafe*racer
SSD900 Darmah
Posts: 364
Joined: Tue Nov 16, 2004 1:49 am
Location: Castro Valley, CA

Post by cafe*racer »

Do you want to sell them?
MartinMille BANNED
BANNED
Posts: 766
Joined: Fri Sep 21, 2007 8:15 pm

Post by MartinMille BANNED »

Hey Bruce

If yours are like the ones in the pictures above , on Fleebay you will get at least US$100+ for them , and NOS well over 200, WHY you ask ? its a little like "Jod and 4777 rims" same goes for these caps, for someone doing a restore this is what they look for , I agree with you in that they are useless to use, if you seal them with silicone they work just as well

Defiantly don't through them out , I have 2 used sets and 2 NOS that I'm using in my resto's
cafe*racer
SSD900 Darmah
Posts: 364
Joined: Tue Nov 16, 2004 1:49 am
Location: Castro Valley, CA

Post by cafe*racer »

Of course I didn't pay anything near that price. It's crazy, the buyers on ebay have the same access to these parts as everyone else...the rich must really be lazy after all!

Martin, I'm not saying but the ones I got came from your backyard, enough of a clue ;) They looked high and low and I waited a long time after sending money, so I think I got the last set available.

J.
MartinMille BANNED
BANNED
Posts: 766
Joined: Fri Sep 21, 2007 8:15 pm

Post by MartinMille BANNED »

LOL never say you got the last set, there is always someone somewhere just waiting to sell,
I agree with you in finding sites can be extremely time consuming and sometimes its in the way you sell or miss-spell a word and you find a new site like I did a little while ago with lots of NOS parts on offer
If you want something bad enough and take the time to look you will find what your after.
Fleebay is just more convenient for a lot of buyers and most don't even know where to begin to look for themselves.
There are many hidden caves still out there to be discovered ;)
machten
MHR / S2
Posts: 478
Joined: Sun Oct 29, 2006 8:37 am
Location: Perth, Western Australia

Post by machten »

I've come across a few lately! Don't get too excited, 8 of them are taken (4 by me!!) but there are a few spare. They are not mine, but from an old school ducatisti. If you're inerested, PM me. They'll be on eBay over the next wee while otherwise. They are all basically used but pristine. No cracks or anything.

Image

Kev
wdietz186
Cagiva Alazzura
Posts: 714
Joined: Sun Sep 10, 2006 5:40 pm

Post by wdietz186 »

They were in the bottom of that box full of JOD headlamps Right?
Bara
Cucciolo - the Lil Pup
Posts: 16
Joined: Sat May 30, 2009 4:11 am

Post by Bara »

Do new member get a chance at a couple of these?
Like you guys, I wouldn`t mind a couple on my bike.
Email me wdoughty5@bigpond.com if you have a couple leftover.
Thanks cheers Justin
Post Reply

Return to “Bevel Drive Twins”