<-=- Club Bevel Heaven -=->

I ended up removing the spacer from behind the 36 tootth rear spocked and machined a chamfer on the edge of the spocket carrier, this worked fine
I had no problems with the clearance of the 16 tooth front spocket.
But I have since put the 15 tooth back on.

Dave

Thanks for your responses, but Bevel Rubber don,t make them to suit swing arms with the chain adjuster. Road and Race don't stock a replacement.
I was hoping to buy some second hand ones, if some one has sprares kicking around their shed.

CHEERS

Why Don't you talk to Ron Young about the problem.


Cheers

Hi,

I was wondering anyone could help me in locating a swing arm end cap for my SD 900?


CHEERS!

Matin,

There is a Darmah for sale at Eurobrit. Have a look at their web site, but I think they may be dreaming a little with price.

CHEERS
From a local

Hi,

I believe marzochhi stradas take 28 lbs. This should be on the sticker around the valve.

Cheers
Dave

Hi,

Had a look at your photos, its a little had to see the crack. Is that it on the centre line of the axle?
It would be much safer to grind and remove the crack and have it TIG welded up than ride around with the crack unrepaied.
After grinding to remove crack it needs to be dye penetrant ...

Hi

Sounds like it might be a problem in your ignition switch. My darmah stop dead recentley. After many head scratches I found there was no continuity between one of the ignition wires were it plugged into the back of the ignition and the contact inside. It all looked OK until you put a meter on ...

The rear sprocket I fitted was a 36 with a 16 front.
The new chain I used was a 530 "x" ring chain which seemed larger than the one I removed.
Once I spaced the spocket I needed to adjust the wheel space to make sure front and rear sprockets were aligned.
Do you see any problems in doing this ...

Hi, I have just replaced the chain and rear spocket on my 79 Darmah.
I found I needed to make a spacer to mount the spocket out from the sprocket mount, as to give enough clearance for the chain.
Is this normal to have to do this, so that the chian doesn't interfear with the sprocket mount?

Dave

Hi,

I have just recently rebuilt my AG Stradas and used 5 weight fork oil and this works fine.

Dave